Carla Cain Table Saw August 28th, 2018 - 09:28:03
The cabinet saw, contractor saw, hybrid saw, and bench top saw are all types of table saws that will help you in your woodworking projects. Each saw is slightly different to accommodate the certain needs of the woodworker. One must find what they need out of there table saw before determining what type of model they need. However, for the average woodworking projects, you cannot go wrong with a quality contractor saw.
Needless to say, the table must be exactly the same height as the top of the table saw table and you may need to extend the slots for the miter gauge into the beginning of the top of the outfeed table. If your saw extension table extends 50 inches or so to the right of the blade, so should your outfeed table and it should extend along the entire back edge of the table saw to the left of the blade. The saw should ideally be oriented so that you can bring long lumber through the shop door and directly onto the saw table without having to turn a corner.
Beginning at the bottom, the table saw base houses the working parts of the saw, including the trunnions, the arbor assembly, the sector gears, and sometimes the motor. On some saws, the base is a "cabinet" type, meaning that a fully enclosed base extends all the way to the floor. Other saws have an open base, meaning that the base consists of a metal box that surrounds the internal working parts of the saw on four sides, but not the bottom. Open base saws have legs that extend downward from the bottom of the base to the floor.
Cabinet table saws have the circular saw attached to a table with a cabinet. It is the largest and the heaviest of the table saws and therefore is not moved around like the other table saws. The cabinet table saw is more durable and has less vibration which makes for a smoother cut. However, the cabinet saw is more expensive than the other types of saws and usually requires the installation of a heavy circuit. The cabinet saw also has a height and tilt adjustment feature and has better dust collection than the other models.
Some saws shield the blade in a casing underneath the saw table and suck the dust out directly from there. Others slant the floor of the saw cabinet towards a dust collection port. Many just allow the sawdust to accumulate on the floor under the saw until you clean it out. You will always have some cleaning of the interior to do. Perhaps you won't wait until the sawdust has totally encased the trunnion gears packing itself up to the bottom of the table top. You will need to connect the saw to a dust collector through its dust port. The suction of the dust collector should be about 350 CFM for a 10" saw and more for a larger saw.
Care to Shout Your Thoughts on Ridgid Table Saw Dust Collector Normandieusa Ridgid R4512 10quot Hybrid Table Saw Review Saveenlarge