Carla Cain Table Saw August 28th, 2018 - 09:42:39
A table saw is one of the most popular pieces of machinery used for woodworking. It consists of a circular saw powered by an electric motor that is mounted onto a table. In order to cut, material is pushed through the saw on the top of the table. It is used mostly for large wood projects such as fences, tables, book shelves, etc. When selecting a table saw it is important to know the different types and the pros and cons of each. The following are the four basic types of table saws and what they have to offer.
Another important safety device is the magnetic switch. This device protects you after an electrical power failure. If the power fails and you have a regular switch, the saw will come back on when the power comes back on. If you were to be near the blade at the time, this could be disastrous. A magnetic switch will not allow the saw to start again until you press the button. The location of the switch is also important. It should be right out front where it can be quickly accessed by a hand, foot or knee in the event of an emergency. The off button should be wide, red in color and should extend outside of the switch box like a mushroom for fast access.
The size of the cast iron table saw top is also important: the larger the better. When you are sawing large objects, you want as much flat table surface as you need to support the work piece flat to the blade for accuracy. Larger table size is usually accomplished by attaching cast-iron table wings to the edge of the main table. These wings must be as flat as the table and the seam they create must be aligned so that the top of the wing is flush to the table saw table along its entire length.
The cabinet saw, contractor saw, hybrid saw, and bench top saw are all types of table saws that will help you in your woodworking projects. Each saw is slightly different to accommodate the certain needs of the woodworker. One must find what they need out of there table saw before determining what type of model they need. However, for the average woodworking projects, you cannot go wrong with a quality contractor saw.
The smallest motor I would even consider for a 10-inch saw would be 3 horsepower. For a 12" to 14" saw it would be 5HP and for a 14" to 16" saw, I'd like 7.5 HP. You will also need to consider if the saw motor is single or three phase. Three phase motors use electricity a bit more efficiently. If you don't have three phase power at your location, however, you will either have to buy single phase or purchase and install a phase converter large enough for your saw motor. Most saw motors use 230 or 460 VAC power, so make sure you have available in your shop the voltage your saw will require. Three phase motors can run on 208 to 220 volts or higher, depending on the motor.
Care to Shout Your Thoughts on R4512 Table Saw Ridgid Table Saw Switch Wiring New Ridgid R4510 Table Saw Wiring Rh Timesofnews Co Ridgid R4512 Table Saw Dust Collection Ridgid R4510 Table Saw