Courtney White Table Saw August 12th, 2018 - 08:32:33
The quality and accuracy of fence systems, however, varies greatly across the spectrum. The quality of a table saw's fence system is an extremely important consideration: A poorly designed or inaccurate fence greatly diminishes the quality and accuracy of the cut, and can be a source of significant frustration. For saws in the price range of most hobbyists, the famous Biesemeyer T-square fence design sets the standard. Fortunately, many smaller, more affordable saws come standard with a reasonably accurate system patterned after the tried and true Biesemeyer design.
The bench top saw, also known as the portable saw, does not come all the way to the floor but is meant to be placed on top of a table for support. This is the more lightweight version of the table saws. They usually can be carried by one person from job to job.
There is a rule that says, "Never stand directly behind a horse or a table saw." Sooner or later every table saw operator will do something stupid that causes a kickback. If the operator makes it a practice to avoid standing where the kickback will occur behind the blade, he or she will probably avoid the severe injury that can be inflicted by a flying piece of wood striking the face, neck, chest or arms of the woodworker.
My ideal would be to never have a speck of dust reach the gears of my table saw trunnion and that all sawdust would be sucked away from the saw blade and out of the machine as soon as it was made. I would never need to clean out sawdust from inside the saw cabinet and the trunnion would always operate smoothly and easily. While I don't expect to ever see my dream fully realized, there are saws on the market today that closely approach this level of efficiency in sawdust extraction.
If you consider that a sheet of plywood measures 48" in width, I would think that you might want to opt for a 50-inch rip as opposed to the slightly less expensive 30" rip capacity. You might want to rip off only one inch from that sheet of plywood and, while doing that, you will want the plywood to be fully supported. You might want to crosscut a sheet of plywood into two 48" pieces. You also should consider the rip space to the left of the blade: The wider, the better. Sometimes, you might want to accomplish tasks that require the fence to be put over to the left side of the blade.