Tammy Branch Table Saw August 28th, 2018 - 16:12:57
The smallest motor I would even consider for a 10-inch saw would be 3 horsepower. For a 12" to 14" saw it would be 5HP and for a 14" to 16" saw, I'd like 7.5 HP. You will also need to consider if the saw motor is single or three phase. Three phase motors use electricity a bit more efficiently. If you don't have three phase power at your location, however, you will either have to buy single phase or purchase and install a phase converter large enough for your saw motor. Most saw motors use 230 or 460 VAC power, so make sure you have available in your shop the voltage your saw will require. Three phase motors can run on 208 to 220 volts or higher, depending on the motor.
The motor, trunnions, arbor assembly, and gearing make up the essential mechanical components of the saw. These quality and robustness of these components varies considerably and can greatly impact the durability of the saw, its capacity for cutting heavy stock and its ability to stay in adjustment and hold settings.
Beginning at the bottom, the table saw base houses the working parts of the saw, including the trunnions, the arbor assembly, the sector gears, and sometimes the motor. On some saws, the base is a "cabinet" type, meaning that a fully enclosed base extends all the way to the floor. Other saws have an open base, meaning that the base consists of a metal box that surrounds the internal working parts of the saw on four sides, but not the bottom. Open base saws have legs that extend downward from the bottom of the base to the floor.
The rip fence guides the wood as it is being ripped (cut along its length) and can be positioned to any width of cut within the saw's range. The fence rides on fence rails attached to the front and rear edge of the table. Ideally, the system keeps the fence perfectly parallel to the plane of the blade, regardless of where the fence is positioned.
A hybrid table saw is a lot like the contractor saw with a few key differences. For one thing, it is much more compact than the contractor saw and does not require as much room in your tool shed. The hybrid table saw also offers some of the features of the cabinet saw. With its solid and heavy base, it has the lower vibration of a cabinet saw along with dust control. A contractor saw or a hybrid saw of good quality suits the needs of most woodworkers.
Care to Shout Your Thoughts on Circular Saw To Table Saw Conversion By Cujmy Youtube
Posts Related To Circular Saw Or Table Saw