Home / Table Saw / Circular Saw Or Table Saw / Circular Saw Or Table Saw Circular Saw Table Saw Kit Plunge Circular Saw Vs Table Saw Circular Table Saw For Sale In South Africa Circular Saw Or Table Saw
Tammy Branch Table Saw August 28th, 2018 - 17:26:55
Motor horsepower and blade size are closely related. The larger the blade, the more horsepower you will need to cut, at full blade height, through a piece of wood. Too much power is never a problem. Too little power can cause the saw to bind, slow down and even stop in the middle of a cut. This is not good, nor is it safe.
Most table saw trunnions are made to tilt either left or right (but not both) to a maximum of 45 degrees from vertical. If you have a choice, and you usually do, never buy a right-tilt saw for the following reason. A right-tilt saw tilts the blade towards the fence and can pinch a work piece into the fence, causing a jam or, worse, a kickback just as the cut is finishing. Further, on a right-tilt saw, the blade is tilting towards the fence and could cut into and ruin it if the fence were to be inadvertently moved too close to the spinning blade. A left-tilt saw tilts away from the fence and instead of pinching the work piece, allows it to rise vertically slightly, if need be.
The bench top model is preferred for those who are looking for a table saw that is portable and less expensive; however, remember that you always get what you pay for. The bench top saw has the least amount of capability out of any of the table saws. With the decreased size and weight of the saw, it is less durable and there are greater restrictions of the size of projects one can do.
The saw should come with a Biesemeyer or similar type fence included in the purchase price. This type of fence locks and aligns itself to a rectangular tube attached to the front of the saw table when you press down on a handle. Fence accuracy and ease of operation will be important every time you touch your table saw and so a cheap fence is no bargain. The fence will probably read measurements along a stick-on measuring tape on the top of the front fence rail tube. You will need to carefully adjust the fence for accuracy. Instructions of how to do this should come with the set-up instructions for the saw.
The rip fence guides the wood as it is being ripped (cut along its length) and can be positioned to any width of cut within the saw's range. The fence rides on fence rails attached to the front and rear edge of the table. Ideally, the system keeps the fence perfectly parallel to the plane of the blade, regardless of where the fence is positioned.
Leave Your Reply on Circular Saw Or Table Saw Circular Saw Table Saw Kit Plunge Circular Saw Vs Table Saw Circular Table Saw For Sale In South Africa Circular Saw Or Table Saw
Posts Related To Circular Saw Or Table Saw