Edith Hart Table Saw August 14th, 2018 - 00:55:19
The smallest motor I would even consider for a 10-inch saw would be 3 horsepower. For a 12" to 14" saw it would be 5HP and for a 14" to 16" saw, I'd like 7.5 HP. You will also need to consider if the saw motor is single or three phase. Three phase motors use electricity a bit more efficiently. If you don't have three phase power at your location, however, you will either have to buy single phase or purchase and install a phase converter large enough for your saw motor. Most saw motors use 230 or 460 VAC power, so make sure you have available in your shop the voltage your saw will require. Three phase motors can run on 208 to 220 volts or higher, depending on the motor.
Most table saws - other than small bench top models - are equipped with induction type motors in the 1 - 5 HP range. On larger saws, you'll most often find a "totally enclosed, fan cooled" (TEFC) induction motor. A TEFC motor is designed for continuous duty and is sealed against dust and other contaminants - a significant advantage in a woodshop.
A table saw is one of the most popular pieces of machinery used for woodworking. It consists of a circular saw powered by an electric motor that is mounted onto a table. In order to cut, material is pushed through the saw on the top of the table. It is used mostly for large wood projects such as fences, tables, book shelves, etc. When selecting a table saw it is important to know the different types and the pros and cons of each. The following are the four basic types of table saws and what they have to offer.
Cabinet table saws have the circular saw attached to a table with a cabinet. It is the largest and the heaviest of the table saws and therefore is not moved around like the other table saws. The cabinet table saw is more durable and has less vibration which makes for a smoother cut. However, the cabinet saw is more expensive than the other types of saws and usually requires the installation of a heavy circuit. The cabinet saw also has a height and tilt adjustment feature and has better dust collection than the other models.
Among the four types of table saw, this type is the biggest and weightiest since it is made up of great volume of steel and cast iron. This is provided decrease vibration activities when working and increase the correctness of the work. If you are planning to have this one, you must be sure to have a long-lasting circuit which is definitely needed for its induction motors to run ranging from 3 up to 5 HP or 2 to 4 kW. This also features a dust port to improve dust collection and also has a fine-tuning on elevation and incline.