Louella Craig Table Saw August 05th, 2018 - 10:46:52
The cabinet saw, contractor saw, hybrid saw, and bench top saw are all types of table saws that will help you in your woodworking projects. Each saw is slightly different to accommodate the certain needs of the woodworker. One must find what they need out of there table saw before determining what type of model they need. However, for the average woodworking projects, you cannot go wrong with a quality contractor saw.
The smallest motor I would even consider for a 10-inch saw would be 3 horsepower. For a 12" to 14" saw it would be 5HP and for a 14" to 16" saw, I'd like 7.5 HP. You will also need to consider if the saw motor is single or three phase. Three phase motors use electricity a bit more efficiently. If you don't have three phase power at your location, however, you will either have to buy single phase or purchase and install a phase converter large enough for your saw motor. Most saw motors use 230 or 460 VAC power, so make sure you have available in your shop the voltage your saw will require. Three phase motors can run on 208 to 220 volts or higher, depending on the motor.
The trunnion is the mechanism inside the cabinet which is responsible for both raising and lowering the blade and tilting the blade for bevel cuts. It is controlled from the outside of the saw by two separate wheels or cranks: one for raising and lowering the blade (usually found on the front of the cabinet) and the other for tilting the blade (either left or right, depending on the saw) which is usually, but not always, located on the side of the cabinet.
A table saw is a woodworking instrument that has spherical saw blade, escalated on the arbor, which functions with the use of an electric motor. The sharp edge extends beyond the facade of a table that serves as a hold for the materials being cut. It works well with cabinets such as filing cabinet and dresser, same as with furniture with plane parts. This is mostly, helpful when you would want to maximize your place at home or at the office and you can't afford to have long pieces and bulky furnishings.
Also known as the open-stand saw, the contractor saw is heavier and more durable than the bench top saw. Its circular saw is mounted on a heavy table with an open set of legs. This type of saw is usually preferred for those who have a tool shed at home since it is moderately-priced and does not require any extra voltage than is provided in a regular outlet. While this model is heavier and less portable than the bench top model, the contractor table saw is still usually moved from job to job (most contractor saws come with wheel attachments to make this easier).