Tami Skinner Table Saw July 30th, 2018 - 13:45:37
Some of the nicer table saws have the caster wheels permanently mounted inside the cabinet so they are never seen and are never in the way. A foot pedal controls raising the saw up into the mobility position and then lowering it back down onto the floor. If your table saw does not have this feature, after-market mobility bases can be purchased as needed.
Also known as the open-stand saw, the contractor saw is heavier and more durable than the bench top saw. Its circular saw is mounted on a heavy table with an open set of legs. This type of saw is usually preferred for those who have a tool shed at home since it is moderately-priced and does not require any extra voltage than is provided in a regular outlet. While this model is heavier and less portable than the bench top model, the contractor table saw is still usually moved from job to job (most contractor saws come with wheel attachments to make this easier).
Some shops are small enough to require that all machines be able to roll around on the floor. The theory is that you pull out only the machine you are using at the time. In planning your shop, you should decide if your space requirements will mean that everything has to roll, some machines but not others have to roll or all machines can remain in their own positions permanently. Many cabinet saws offer the optional extra of some sort of mobility device. In the case of a table saw, you don't want it rolling around while you are pushing lumber through it and so the wheels must retract enabling the saw to rest on its cabinet base on the floor.
One of the more useful add-ons for just about any table saw is either an upgraded system offered by the manufacturer, or an aftermarket miter gauge or crosscutting sled. These tools provide, in various combinations, repeatable incremental angle positioning, longer fences, stop blocks and other advanced features that can come in handy in projects that call for precision crosscutting.
The rip fence guides the wood as it is being ripped (cut along its length) and can be positioned to any width of cut within the saw's range. The fence rides on fence rails attached to the front and rear edge of the table. Ideally, the system keeps the fence perfectly parallel to the plane of the blade, regardless of where the fence is positioned.