Home / Table Saw / Grizzly Contractor Table Saw / Grizzly Contractor Table Saw Review Grizzly 10 Contractors Table Saw Grizzly Contractor Table Saw G1022 Grizzly 10 Inch Contractor Table Saw Grizzly Contractor
Willa Delaney Table Saw August 25th, 2018 - 05:30:49
Also known as the open-stand saw, the contractor saw is heavier and more durable than the bench top saw. Its circular saw is mounted on a heavy table with an open set of legs. This type of saw is usually preferred for those who have a tool shed at home since it is moderately-priced and does not require any extra voltage than is provided in a regular outlet. While this model is heavier and less portable than the bench top model, the contractor table saw is still usually moved from job to job (most contractor saws come with wheel attachments to make this easier).
The bench top saw, also known as the portable saw, does not come all the way to the floor but is meant to be placed on top of a table for support. This is the more lightweight version of the table saws. They usually can be carried by one person from job to job.
At least one, but preferably two or more access doors should be provided leading into the cabinet of the table saw. The one you will use most often will be for cleaning out the interior of sawdust. Another should give easy access to the motor, trunnion and belts for adjustment and repair. Many saws provide a removable access panel instead of a second door. That's fine for occasional motor, arbor, belt and trunnion access but you will want the sawdust door to open and close easily.
The quality of the table saw surface (or "bed") is extremely important to the overall performance of the machine. The table surface needs to be reliably flat and rigid to properly support the workpiece during a cut. As one of the most massive parts of the saw, the table surface also plays a major role in absorbing vibration. Because of the need for mass, rigidity and flatness, cast iron is the material of choice for the top of a table saw. On a quality saw, the table is made using a hefty quantity of cast iron and state-of-the-art foundry methods. The end result of the casting process is then precision ground to flatness in the .0005'' tolerance range.
Another important safety device is the magnetic switch. This device protects you after an electrical power failure. If the power fails and you have a regular switch, the saw will come back on when the power comes back on. If you were to be near the blade at the time, this could be disastrous. A magnetic switch will not allow the saw to start again until you press the button. The location of the switch is also important. It should be right out front where it can be quickly accessed by a hand, foot or knee in the event of an emergency. The off button should be wide, red in color and should extend outside of the switch box like a mushroom for fast access.
Leave Your Reply on Grizzly Contractor Table Saw Review Grizzly 10 Contractors Table Saw Grizzly Contractor Table Saw G1022 Grizzly 10 Inch Contractor Table Saw Grizzly Contractor
Posts Related To Grizzly Contractor Table Saw